-
It would be great if Dexed could be used to load and create 4-op patches accurately; even better if it could be used with a DX21 or DX11 directly (same as DX7). I see DX21 sysex import in the TODO of …
bryc updated
3 months ago
-
It seems like only wave is supported in OPL4. At least when we listen to the output, and read the doc. Looking at the code though, there are traces of the FM-part (afterall, enabling the Wave part on …
-
When I listen to tracks like the YS II Special, the OPL2's own drums are barely audible.
-
I recently took an interest in the world of tracker music and discovered that there are _a lot_ of FOSS trackers, but that packages for them are scattered across distros (Debian has quite a lot though…
fgaz updated
3 months ago
-
**Reported by grauw on 2014-07-23 17:41 UTC**
Currently, the limits on accessing the I/O of the OPL4 are not emulated.
The limitations are described on page 8 of the application manual:
http://map.g…
-
1chip MSX で FM 音源が 3.5mm ジャックから出力されない
-
Ok, I had some fun yesterday with thinking about a way openMSX commands could be grouped (like object methods & properties, or like a namespace), and perhaps controlling / accessing commands could be …
-
As you offer v9958 installation, it could be good to offer an upgrade option to MSX2+. This will require port F4 and FM-PAC mono functionality. The FM-FAC SRAM option could be skipped. And you need a …
-
The YM2413's vibrato and tremolo depth are fixed at 13 cents and 4.8db respectively, which is not the default on other OPL chips. To accomplish this on other OPL chips the register at $BD must be set …
-
toggle_vu_meters works fine for the PSG, SCC, OPLL and OPL4-wave channels, but it doesn't show either the OPL3 or the OPL4-fm channels.