-
*Please describe the question or issue you're facing with "How to run Matter applications with Thread networking on Ubuntu - Matter on Ubuntu documentation"
I have couple of issues with the dcoumen…
-
I am getting a mismatch in cmake and protobuf as my best understanding on my ubuntu x86 platformwhen building using the following command
`INFRA_IF_NAME=enp2s0 RELEASE=1 REFERENCE_DEVICE=1 BACKBONE…
-
**Describe the bug** A clear and concise description of what the bug is.
Normally, the frame count at the link layer of an outgoing packet should increase only. From the capture of packets, the frame…
-
Hei People,
I want to install OpenThread on the MDK dongle, sure, I read the tutorial of course, I noticed that the build is outdated in the official documentation, that brings some problems for m…
-
Tried both the one offered on
https://darkxst.github.io/silabs-firmware-builder/
and a manual download of ot-rcp-v2.4.2.0-zb-gw04-1v2-230400.gbl
After a while the OTBR add-on stops itself
[lo…
-
### Describe the bug
Recently updated my test harness to use the v2.10.1+spring2024 branch of the project. Since then have been unable to connect to my DUT utilizing the chip tool commands, always fa…
-
Just FYI I have made a bit of progress with this, using the dongle on a raspberry pi running the opnthread border router software with the dongle acting as an RCP as opposed to an NCP as this seems to…
-
Hello,
I am currently trying to run the docker image on Rpi4 with fresh raspbian os. I am connected to internet using wifi connectivity instead of LAN. I have attached nRF52840 as my RCP device.
Wh…
-
## Describe the bug
In my setup, I have a Raspberry Pi (RPI) connected to an OpenThread Border Router (OTBR) via USB, along with a Thread device connected to the OpenThread network. After a period of…
-
### Describe the issue you are experiencing
I want to run an OpenThread and Zigbee network using the Silicon Labs multiprotocol addon. After enabling OTBR and ZHA integration, OTBR and ZHA work fine.…