-
Hi,
I used esplink wifi firmware for a long time and wanted to step in to MQTT type of data communication to test with Homey OTGW MQTT. I tried flashing several versions and when I flash and keep i…
-
Hi, thanks a lot for this firmware, it works most of the time with my Home Assistant setup.
I noticed however that the data sending through MQTT is having hickups many times a day.
The items in H…
-
### The problem
I fail to receive updates of any sensor in the opentherm GW integration.
The values are correctly set upon HA restart, but are never updated afterwards.
I am running Opentherm Gat…
-
Domoticz Log gives multiple random "Connection reset!" messages.
![Domoticz-Log](https://github.com/rvdbreemen/OTGW-firmware/assets/31951195/0180c833-2e88-4935-8388-5f9d5edc2c35)
Not sure what the…
0crap updated
5 months ago
-
Using direct socket cause connections issue and instabilities in both OTGW and HA, and it makes impossible to use an external OTMonitor instance.
Nowadays MQTT can be used, see https://github.com/rvd…
-
I just installed your integration, my otgw does not accept the set point command. Is there a minimum firmware version required? Am on 6.1.
I use a serial connection, can confirm other values are r…
-
Hi,
Can you add support with this otgw software:
https://github.com/rvdbreemen/OTGW-firmware
thanks
Anton
-
Hello,
I have OTGW from NodoShop and Wifii WeMos D1 Mini with its firmware dated 20-03-2023 (from NodoShop)
I see some issues , one of them is related to FW reboot.
In reboot_log.txt of "FSex…
-
### Link
https://www.aqara.com/eu/product/radiator-thermostat-e1
### Database entry
{"id":80,"type":"EndDevice","ieeeAddr":"0x54ef441000128356","nwkAddr":12635,"manufId":4447,"manufName":"LUM…
-
Probably better to share these graphs here and not on HA forum.
As promised some further graphs. I set aggression to 3, overshoot to 30. To note, until 7am the heat pump was in night mode, capping …