-
### What happened
Device: Raspberry pi 4 - 4GB, 1x ribbon camera, 1x logitech usb camera
I am setting up a new machine and installing the essential programs using KIUAH on my newly flashed RPi Bookw…
-
### What happened
I tried to install on a raspberry pi 4B debian version 12.1
Did a fresh install of kiauh followed by installing fluidd klipper and moonraker.
Then I tried crownest but it failed…
-
Somebody else claims to have flashed this device with BK7231N image but was not able to dump anything or access the power monitoring options. I want to flash several of these and would like to avoid …
-
Hi all,
I tried to use cloudcutter on my LSC Smart Plug 970766 with the lsc-2578685-970766-smart-plug-cb2s.json profile. Unfortunately the process failed with error "Using PSK v1 - Received PSK ID …
-
With my first test to auto-route a double sided pcb exported from pcb-rnd I discovered it's only trying routes on the same layer of the pcb that will never work because there is smd components on both…
-
File "geda_pcb_output.py", line 59
print ''.join(self.fp)
^
SyntaxError: invalid syntax
That results in "unable to save file.
Inkscape version is: 1.0 (1.0+r73+1)
OS: Linux…
-
1. we need to know the max number of ingredients.
2. plot a histogram of pizzas according to their number of ingredients
3. plot a histogram of teams according to the number of people
4. plot a his…
-
`Checking UDP port 53... Available.
Checking UDP port 67... Available.
Checking TCP port 80... Available.
Checking TCP port 443... Available.
Checking UDP port 6666... Available.
Checking UDP por…
-
After more than two years of collective effort that was put
into making it better, `Lepton EDA` has become quite different
compared to what it was forked from.
However, it's hard to spot the differ…
-
Looking in /usr/share/pcb-rnd/pcblib/parametric, I want to use 'connector' for a basic 40-pin header.
The documentation says to use:
```
connector(40, 2)
```
as the footprint.
lepton-sch2pcb…