-
Hi,
I want to build a setup as described in the tutorial, however the wiring diagrams seem to be missing (e.g. the 'wiring everything' section). Do you have these diagrams or images available some…
-
I'm trying to install leosac and compiling from the source. However when the compilation reaches that point, it doesn't finish or give me an error even after leaving it all night. Please assist me wit…
-
Having a problem with the installation of piface on a Pi 3
Went through all the steps and get the following form the console
pi@raspberrypi:~ $ sudo apt-get install python{,3}-pifacedigitalio
Rea…
-
Hi,
I have been using pi-mqtt-gpio since a longer time now and wanted to change to the new mqtt-io. I am using the piface2 module.
Was there a change regarding the pin numbering? In my old configur…
-
I use the Pi4J libraries to control 2 relays on a PiFace Digital board. Up till version 1.3 everything worked fine.
With the 1.3 distro I need following libs: pi4j-core.jar, pi4j-device.jar and pi4j-…
-
- [x] I have read the [README.md](https://github.com/flyte/pi-mqtt-gpio/blob/develop/README.md) file and visited the [Github Wiki](https://github.com/flyte/pi-mqtt-gpio/wiki) to see if the information…
-
after updating the raspberry pi3 to the latest firmware the piface2 board can no more be detected
- Jessie lite
- Piface 2
- Rapberry pi3 (using spi interface)
we did reproduce the same problem af…
-
Hi there,
We currently have a few Pis with PiFaces running Leosac, and all is working fine with a Wiegand reader. The trouble we're having is enabling the user to exit through the door without using a…
-
I want to use piface digital. There is a module piface2 for the piface digital 2 Cna I use this module with the old piface digital ?
When trying this module I get
```
2020-07-09 09:24:14,803 mqt…
-
How do you get the address id for sensor in that module. I have a DS18B20 sensor connected to input 2 of my piface digital.
I get
```
w1thermsensor.errors.NoSensorFoundError:
Could not find sens…