-
Running on a rpi 3b, running Debian 12 Wormbook, Linux 6.1.0-rpi7-rpi-v8 aarch64.
I've added `gpu_mem=250` to /boot/config.txt.
I built successfully but when trying to run, the program instantly…
-
Hi!
I use PiFmRds with piping audio.
My command is: mpg123 --loop -1 --buffer 1024 --no-icy-meta -s http://streamURL:8000 | sox -t raw -b 16 -e signed -c 2 -r 44100 - -t wav - equalizer 11800 0.7q 20…
-
Hi,
if you pause the sox or whatever is piping to the pifmrds it will stuck at the last buffer so what about to add a pause option to full this buffer with silence and keep it this way until we put…
-
Hi,
Used rpitx to output a song converted to wav and play on my stereo. FM mode, chose 88Mhz (no station there)
Worked better than expected. Without wire, in a case, across the room - decent signal…
-
Hi,
I use pifm in the morning to listen radio with this command
` sudo sox -t mp3 $urlradio -t wav -r 44100 -c 2 - | sudo ./pi_fm_rds -freq $FREQ -audio - -ps $radio -rt $radioinfo
And I stop wit…
-
What is the best method to terminate a FM broadcast? When I use `pkill fm_transmitter` the program gets stuck into a loop and broadcast a fragment of the sound indefinitely. This happens both when I b…
-
I am using a RPI3B and could build PiFmAdv without any problem.
But when I want to test it with the `stereo_44100.wav` I hear a male voice but this is very very slow. I can even not understand what…
-
I've tried messing with the ppm, and that took care of the low pitch audio. However there is a static in all of the signals, I have tried various sound files on different frequencies. Also I think the…
-
Hello, I think the stdin is not working properly.
After connecting my Android phone with the Raspberry pi 3 via bluetooth (audio enabled), I send audio by playing a Spotify song, but I cannot play it…
-
Why is the volume so low if you use this command:
`sudo arecord -fS16_LE -r 44100 -Dplughw:1,0 -c 2 - | sudo ./pi_fm_rds -audio -` ?
i am trying to stream spotify over the fm band but even if i tur…