-
Hi
I ran leaniiorx, then got following error.
% ./leaniiorx -f 2395e6 --bw 2000e3 -v
Setting RF bandwidth 2000 kHz
** IIO: in_voltage_sampling_frequency failed with Unknown error -…
-
看到Issues有人提到在嵌入式linux内运行UHD,目前不支持。那么E310v2提供的plutosdr固件或FMCOMMS2的镜像,可以让E310v2在Kuiper Linux 脱机运行gnuradio吗?有相关的资料与资源吗?
-
Hi,
No displayed result, certainly due to a -quiet selector in the reading instructions...
https://github.com/analogdevicesinc/plutosdr_scripts/blob/master/pluto_temp.sh
f5uii updated
3 years ago
-
Hi
I am running plutosdr on linux with web interface and I here a constant tone. There is no sound for FM radio or any channel.
Thanks
ghost updated
4 years ago
-
## Issue Description ##
Getting the error message "srsRAN crashed. Please send this backtrace to the developers ..." while starting srsUE
## Setup Details ##
We are trying to build a 5G netwo…
-
hi. how can i build the uboot and linux kernel & rootfs? are they open sourced? i didn't find any place that have structure similar to https://github.com/analogdevicesinc/plutosdr-fw . so i cant use t…
-
This line yields the error. This was also mentioned in https://github.com/mhostetter/gr-adsb/issues/31. I see the error every time when I launch the script. I'm using a PlutoSDR as source.
https://…
-
SoapyPlutoSDR currently only works when PlutoSDR is set to its default factory setting. Can this be made more flexible to allow for other IP-addresses or hostnames?
Many thanks.
-
Hello,
I needed to make a small edit to plutosdr_signal_source.cc to have it build with the latest gnuradio. The iio framework has been put in tree and some changes have been made as to how it is …
-
Hi, I realize that you aren't responsible for the LibreSDR but I kinda need help
I tried to copy your pre-built firmware on a freshly formated SD card fileformat FAT32
my LibreSDR does not seem …