-
Hello,
i tried to build this driver for OpenWRT, the module builds and i'm able to load it; however, i get this error in dmesg
```
[10428.560000] ------------[ cut here ]------------
[10428.560000] …
-
* 类似的issue
#672 这是我上个月提的问题
## 2. 详细叙述
上个月使用的N3160主板+R8125BG (4+2.5G)网卡 ,物理机安装`iStoreOS `。使用过程中出现断网拨不上号的问题,中间还找过电信刷新宽带几次,问运维是不是我重拨太多限制拨号了。后面尝试重启我的猫棒`MA5671A` 。 发现可以拨号了,就早早关闭了问题。 中间因为没有重启过机子…
-
*monnier:*
I'm using the pre-built OpenWRT firmware for BT HomeHub 5a and am generally very happy with it. The problem that shows up is that every once in a while, the PPPoE connection goes down and…
-
*txt.file:*
Supply the following if possible:
- Device problem occurs on
tested on VoCore2, Netgear wndr3700, SamKnows WhiteBox8
- Software versions of OpenWrt/LEDE release, packages, etc.
Op…
-
Error building the firmware image
Server response: Unsupported profile: linksys,wrt1900acs
Request Data:
```json
{
"url": "https://sysupgrade.openwrt.org",
"revision": "r19803-9a599f…
-
**Device:** linksys wrt3200acm
**Current Version:** 22.03.2
**Attempted Upgrade To:** 22.03.3
> Server response: Unsupported profile: linksys,wrt3200acm
```
Request Data:
{
"url": "…
-
Hello!
I have a problem 8814au as Access point in openwrt.
If I change the ssid or the encryption key and then restarting the network manager.
it supposed to kill the hostapd process and start …
-
Hi just reporting the error in luci-app-attendedsysupgrade
```
{
"url": "https://sysupgrade.openwrt.org",
"revision": "r19803-9a599fee93",
"advanced_mode": "1",
"branch": "22.0…
-
I'd like to have precise timing for packets sent over a PPPoE link. I can do this manually by turning on hardware timestamping for the underlying ethernet interface and everything works fine. The pr…
-
{
"url": "https://sysupgrade.openwrt.org",
"revision": "r22364-a2973060ea",
"advanced_mode": "1",
"branch": "SNAPSHOT",
"efi": null,
"profile": "hp-proliant-microserver",…