-
I downloaded CFFA1 CD zip which contains couple of CF images meant to be used with CFFA1 card. Opening the images works fine with OpenEmulator's CFFA1 device emulator and I can load and play the games…
-
The ProDOS driver for the HD doesn't report back the block size in the X (low) and Y (high) registers on a ProDOS status call. This would need some modification to the HDD firmware 6502 code to allow …
-
This shows how slow the program +CAT is under PLASMA 2.
Video playback control (pause and frame tracking) can be used to see which tracks and sectors are involved. There is a LOT of disk activity.
I…
-
If an image is dropped to the Prodo window, it is converted to base64 in a img tag.
Am I going too far?
-
On most ProDOS disks,
I am getting `??` in `S` when track `T` is getting updated. But later after more disk activity it gets populated.
But on some ProDOS disks, the status always stays as `??`.
…
-
Given the ProDOS image that is on ROM cartridges (and the internal [LTWIN.po](https://github.com/david-schmidt/tlc-apple2/blob/main/file/LTWIN.po) image), pick out the slot 6 driver and disassemble it…
-
(Spun off from #1321)
AppleWin 1.30.19 (or earlier) currently provides only partial VidHD support.
See the comments here for some info: https://github.com/AppleWin/AppleWin/blob/1127447a10b0cdbf0e…
tomcw updated
1 month ago
-
I booted a ProDOS disk with a program selector written in BASIC. You press to choose a file to run. Using alt-enter to resize the screen works, however the program selector grabs the keypress and ex…
-
Hello,
Using ADTPro in a machine that has an UltraWarp accelerator installed has issues with screen corruption when receiving packets with an Uthernet.
The issue appears to be caused by the unil…
-
If Airheart is run from a ProDOS volume that was remapped to a different slot (ie, 3.5" disk on GS remapped to s2,d1 by smartport ROM), the loader crashes at $C211.