-
I'm not sure if the above is possible - please let me know
-
### Is your feature request related to a problem? Please describe.
Following the discussion in #1226. DEYE batteries are mostly supported when using the "Pylontech using CAN bus" battery provider. …
-
How do we change the Pylon battery address? I can't find it in files.
I need to add a second battery to SOFAR - my 20kW inverter has two battery channels.
But I need to change the CAN address.
I as…
-
Hi,
I disovered this Github file to do the same, to get information from my pylontech battery,
I tried without any sucess to compile and load the ino file with arduino ide, using MQTT , so I unco…
-
I have to state that the need to switch baud rates and send the "~20014682C0048520FCC3\r" string is a mistake that results from not understanding the different Pylontech ports and protocols. While thi…
-
After just a few hours of discharging (no charging via solar or city power), the modules have different residual capacities.
"Overvoltage errors" occurred in the module with the lowest remaining ca…
-
Hoher Ladestrom ... high current
Zellenungleichgeweicht ... cells unbalanced
![image](https://github.com/grasmax/s1/assets/26674731/0f22b66d-5065-4f9a-9144-dd57d59caee9)
Temperatur niedrig ... low …
-
### What happened?
Nur schonmal im Voraus im neuesten Development schein ein Bug zu sein wenn ich Ihn ein spiele weil er überall sagt es gibt eine neue version dann erkennt er den Pylonen nicht mehr …
-
Just wondering if you had any idea how the RS-485 protocol would work. I think the GROWATT inverters don't all have CAN but instead use RS-485. I've read that they communicate with the pylon-tech ba…
-
Möchte meine Anlage mit einem ca. 7 bis 10kW-Speicher AC-seitig aufrüsten und denke da an Victron Multiplus II.
Wer hat diesen Victron mit mehreren Hoymiles WR und HoymilesZeroExport am laufen und ka…