-
Hi, just bougt an QingPing ClearGrass CGS1 device.
Product loks great but make me crazy cause I wanted to add it in HA but after 5 hours browsing the web and trying all i can't, I'm still unable to r…
-
Sorry I am too busy to read up the code right now. It seems like a simple problem that you guys can figure out in no time.
``` bash
$ keybase-installer --prefix=~/bin
error: Permission denied install…
houqp updated
10 years ago
-
I realized that in all my siemens raw data files from 2D pulseq acquisitions, the parameter `i3DFTLength` ist set to `2` (instead of `1`). I checked this for different combinations of Pulseq versions …
-
@pvvx,
I've updated and consolidated the external converter code for Z2M and aligned it to v.0.1.2.1+ specifications:
This is tested against [CGDK2](https://pvvx.github.io/CGDK2/) and [TS0201_…
-
Hi there, I'm having some issues with using the integration in my automations. I have noticed that the report type changes between 12 and 17, presumably because the update interval is maximum 120 seco…
-
### The problem
Hi,
I have a Qingping Air Monitor Lite that I added to HomeKit (native integration). I'm trying to integrate it also in HA using the Qingping integration. If I add the integration it…
-
### Link
https://github.com/pvvx/ZigbeeTLc/
### Database entry
{"id":10,"type":"EndDevice","ieeeAddr":"0x58dd5782342d585a","nwkAddr":49589,"manufId":4417,"manufName":"Qingping","powerSource":"Batte…
-
My multi-mode gateway 2 firmware version is 1.0.6.
I did not find my door lock model in **devices.py**, so I found a similar model with the following code:
# BLE devices can be supported …
-
Hi! I noticed that TVOC value and measure unit are different with screen, would it be possible to divide it by 218.77 and change unit to mg/m³ ?
-
Hi, after flashed 3.7 firmware to the new device, I'm able to read values in TelinkMiFlasher web page and ESPHome & Home Assistant. Unfortunately, the display always shows the same values (25.4 C and …