-
Hello Timo,
I have put off asking for months because I'm pretty sure it's nothing to do with your fine code, and everything to do with me. But I am stymied :)
I have an ESP32 with a MCP2551 driv…
-
Hi Timo
I think I have some problems in understanding the functions SetProductInformation and SetDeviceInformation. I using a teensy with CAN-Bus driver and have connected it to my SeaTalk NG. Using …
-
# Summary
Digital Switching is not yet part of the schema. Some Digital Switching bus systems like e.g. Raymarine EmpirBus [1] are sending their data via NMEA 2000 and therefore can be monitored and …
-
SignalK uses many different paths prefixes for course data.
When I activate "Navigate to Waypoint" in OpenCPN I see prefix
````
navigation.courseRhumbline
````
It seems come from APB, XTE, …
-
I have an old Raymarine E120 but it works fine. In the menu I found setting for "AIS 38400" so I selected baudrate to 38400
I can´t read any data either via actisense NMEA reader nor via arduino seri…
-
Whenever I use these libraries CAN_BUS_Shield NMEA2000 NMEA2000_mcp
and any of the examples in NMEA2000 I get "failed to open CAN device".
However, if I use just the MCP2515 library I can get th…
-
Hello Timo, i have a problem,
My Yamaha outboard, send fuel flow in NMEA network, i have my esp32 that send the same data.
Raymarine Axiom, read yamaha data and not esp32 data.
Axiom don t allow m…
tmsio updated
4 years ago
-
Hello,
I'm just starting out on my C++ journey and yes, I probably should have started with something easier I admit! However, I have an ESP32 circuit connected to my Raymarine HUD and reading and …
-
A feature request: How difficult would it be to add an option to the plugin allowing the user to record raw radar output (i.e. an array of reflectivity and/or radial velocity for each antenna rotation…
-
Done a manual build with
`cmake -DWX_VER=32 ..`
and thereafter
`make && make package`
The tarball cannot be installed via the import plugin feature from O. It just says error during installation.
…