-
Hi all, I need help with these error on vedirect.
All was working good until I updated to emonSD-08May21
I’m getting checksum errors, but it doenst happen with older version of emonSD
Any help??
…
-
I was able to pull data from my DCC50S via the Renogy hub on ID 96. Perhaps this is different between the DCC controllers and the Rover controllers? Might be worth mentioning in the readme.
-
Add this special RJ12 RS232 to USB cable which is specific to the Renogy Rover to the Amazon parts list.
[https://www.amazon.com/Charger-Controller-Converter-Adapter-Chipset/dp/B07JGRJR4V/ref=sr_1_…
-
Hey Cyril,
Thanks for writing this software, it works great.
I am trying to use a converter/cable to go directly from the Rover RS232 port to computer, without using the Bluetooth module. Have …
-
Hi
thanks for your software
working also for SKU: RCC40RVRE
and bT-2
Looks like ony BT-2 is connect device ID is set to 17. at least for mine.
you might want to add this to the documentatio…
-
I have configured CouchDB (in Docker) and successfully created the Solarthing databases using the --couchdb-setup command as per the configuration instructions. However when I run Solarthing to up…
-
I'm having trouble getting the rngBridge to power up. My Renogy charge controller is pushing out 14.5V on the correct pins. With the buck converter plugged in, I don't see any activity on the rngBri…
-
Hi
I am runnng into the error
**ERROR:root:base client cannot be used directly**
`
INFO:root:[E0:7D:EA:83:xx:xx] Resolved services
INFO:root:subscribed to notification 0000fff1-0000-1000-80…
-
Successfully got this working on a pi zero with a smart battery (RBT100LFP12SH) and rover 40 mppt connected via separate bt1 and bt2 modules.
Battery stats are fine and some of the rover stats are …
-
I'm trying to make a version of this for ESP32/Arduino, and I'm not able to get correct temperature readings. It's probably an error in the way I'm processing the register, but I'm wondering if anyone…