-
2m band selection doesn't route RF signal from antenna A1 in ESDR3 v1.0.7 when using ERS feature. RF signal from HF antenna 3 is routed correctly.
I'm running ubuntu 22 server and ERS run.sh scrip…
-
Using the _Signal_ node to turn on an LED does no longer it turn.
Sample flow export
[
{
"id": "31d7f76a8222d74d",
"type": "inject",
"z": "acac681abde14c62",
…
-
### Initial Check
- [X] I have checked the existing issues and this one is not a duplicate
### Category
📻Smaller Devices
### Description
It doesn't even crash it, IT HANGS IT.
Upon activating …
-
### Describe the bug
When I open waydroid by clicking icon on desktop, waydroid launched, booted. I can see the boot animutation. After few seconds, screen going black, back to TTY, and then the gd…
-
1. Very minor - The silkscreen labels on J3 for TRACECLK and TD1 are backwards. The signals are correct but the silkscreen is backwards.
2. Add a pin and resistor divider for hardware version example…
-
### Log message
```text
Tuya Smart Zigbee Door Sensor receive loop has terminated....
Device matches None with quality of 0%. DPS: {"updated_at": 1725039081.0056617, "141": 0}
Device matches None…
egric updated
1 month ago
-
### Describe the bug
When updating the tunnel server configuration or rebooting a hAP AC2 on nightly `20240411-8627104`, the hAP AC2 RF 2Ghz radio drop all RF links and shows no heard signal. `LQM` i…
-
Hi there!
A am starting ./rpi-rf_receive scripts and it collects a lot of noise radio signal. Why?
The transmitter does not send anything.
> pi@raspberrypi:~/rpi-rf/scripts $ ./rpi-rf_receive
> …
-
### What feature would you like to see added to TallyArbiter?
I want this feature! Has anyone looked at capturing the RF 433 mhz signals from a perfect cue and have them talk to TA- flash green or f…
-
I'm using Arduino 1.8.15.
In the "si5351wire.cpp" section I get an error when compiling "si5351_signal_generator2.ino"
.......
.......
Si5351wire::Si5351wire(uint8_t i2c_addr, uint8_t i2c_sda, uin…