-
The new Launchpad comes with RGB LEDs whereas we only support red-green.
-
I recently purchased what I didn't know was an eWelink powered LED strip. In Home Assistant, it only shows as a switch - on/off. This functionality works, but would it be possible to add the RGB + bri…
-
-
Hello
I bought such a panel P3 64x32 HUB75E, I connected it so in the picture https://imgur.com/a/GWmf2iA and I have a problem with the display I tried also to connect the pin E but without improveme…
-
Zephyr has a LED driver https://github.com/zephyrproject-rtos/zephyr/blob/main/drivers/led/led_gpio.c which is suitable for single LEDs. There is however (IMHO) no good way to handle RGB leds.
**De…
-
### Summary
The [ezWS2812](https://github.com/SiliconLabs/arduino/tree/main/libraries/ezWS2812) library relies on SPI to drive the WS2812. Problem is, only on signal is (MOSI) but two others (MISO, …
-
Hello experts,
first of all many thanks that the firmware development is ongoing!!
Even with the new firmware I have the problem, that the shelly rgbw2 devices (using rgb+w mode, bridge + rgb + wh…
-
Now here we have WS28xx. But it seems WS28xx doesn't fit perfect.
I have completed a driver for [SK9822](https://github.com/HumJ0218/HumphreyJ.NetCore.Devices/tree/master/HumphreyJ.NetCore.Devices/SP…
-
**Is your feature request related to a problem? Please describe.**
No problem. Just an idea for enhancement.
Current situation: I use a total of four H801 LED-Controller. They each have 5 PWM ou…
traeu updated
3 months ago
-
On the OBC we have a RGB LED WS2812 connected to PIN67 (IO Port P2[6]).
It would be nice to have a function available to control this LED by means of setting RGB value.
(on the LPCX board there is…