-
I'm trying to use a HX8357 TFT panel with an ESP32 but the screen is always black.
I'm using the Elipse example and I changed the `User_Setup.h` to these values:
- I've set the `#define TFT_PAR…
-
Here is the output of LCD_ID_readreg:
Read Registers on MCUFRIEND UNO shield
controllers either read as single 16-bit
e.g. the ID is at readReg(0)
or as a sequence of 8-bit values
in special lo…
-
Characteristics
I have used this display.
![pantalla](https://user-images.githubusercontent.com/80415779/110669045-3bb59700-81cc-11eb-8f2f-6f6d997e2cb6.png)
Compatible with **ili9481**, ili9468, i…
-
I'm trying to display a message on the screen but it remains white, however I can run every example sketch without problems. I even tried to simply make the screen gray in setup but it flickers a bit …
-
**Hi Bodmer.
I tried to test the ESP32_SDcard_jpeg example bit wont work for me
Example is untouched
SD CS pin is connected to GPIO 5
MISO, MOSI ans SCK Pins are shared to TFT and TOUCH pins
…
rs3hc updated
3 years ago
-
Hello, where does the processor type switch?
I can not find where the conversion of STM pins to ARDUINO takes place ??? that is, PA1 in 10 pin arduino? I'm trying to build a marlin for the Robin 2 bo…
-
Dear David.
I'm having difficulty connecting a 4.3 'TFT on an SSD1963 controller to an Arduino DUE.
I have:
1. [https://ru.aliexpress.com/item/4-3-480-272-TFT/32920127970.html?spm=a2g0v.search0104.…
-
David... Thank for you for the library... it has been super helpful.
I can see that you identify x9403 ... My question is, what Driver Chip is it?
Do you have the Datasheet?
I dont see any o…
-
Hi community, i have Wemos Lolin32, and a TFT display recognized by id 0x4532 (mcufriend 2.4 inch TFT LCD shield). I have connected just RS to 15, CS to 33 and RST to 32, but the display is very dark.…
-
i hope you can help me and my `friend` are doing a project that requires us to update the 240x240 lcd and what ever we try we are not able to get rid of the flicker can you help us fix this ?
most …