-
Hey guys,
I want to send an IQ file but I cannot get sendiq or rpitx to send anything. The iq file has been created using sdrsharp and has a samplerate of 312.5khz
now when I try
./tune 99.9e6…
-
Greetings - The examples work but I want to use my limesdr-mini. I'm using limetools (limesdr_dump to capture an rf channel, then limesdr_send to play back the IQ file. It works.)
Instead of trans…
-
When hosted on a Raspberry Pi the sdrdaemontx should be able to use the PiTx code in order to use the RPi as a general purpose transmitter.
PiTx can be found here: https://github.com/F5OEO/rpitx
…
f4exb updated
2 years ago
-
Heya! I'm not able to transmit at 434Mhz because the max is 108. The GPIO can handle frequencies from 5 KHz up to 1500 MHz
-
When transmitting with a Pi Zero, I don‘t receive a signal, not on 50khz with my sound card as input, 13.56 MHz ISM, FM broadcast band (with no antenna in order to comply with regulations) or 433/866 …
-
I couldn't tell, but does rpitx support sending 1200 baud AFSK for transmitting APRS packets?
hemna updated
2 years ago
-
When running any of the DMA examples on a raspberry pi zero w that does nothing else, the signal stops after a short amount of time. The actual cut-off time differs between runs, but it's usually some…
-
Hi,
I don't seem to be having much luck.
I installed via Sudo apt-get
- GnuRadio 3.10
- libitpp-dev
and this app seems to have built and installed correctly but when I run it, it says not f…
-
Hi, Trying to get a pocsag doorbell to my house. but I do not really succeed?
Is there anyone who can explain why my python script does not work.
Sorry if I post this in the wrong place!
Regards…
-
Hello, we are a group of students from uruguay, working with the rpitx because we found it very interesting, our main goal is to transmit isdb-t with a raspberry pi. We are working with the gr-isdbt p…