-
Host is:
```
Microsoft Windows 7 [Version 6.1.7601]
```
The destination device is:
```
MicroPython v1.13 on 2020-09-02; ESP32 module with ESP32
```
rshell command-line arguments are:
```
rsh…
-
Setup: a Pyboard V1.1 connected via an FTDI adaptor to UART2. No USB connection. Rshell invocation:
rshell -p /dev/ftdi --editor nano --buffer-size=30
boot.py:
```python
import pyb
pyb.usb_mode(N…
-
I am trying to get the raspberry pi pico working on OpenBSD. I have gotten the firmware onto the pico and got minicom to work; However rshell is unable to connect.
```
Welcome to minicom 2.8
OP…
-
When rshell tries to connect to a board, it passes the name of the port to socket.gethostbyname() as the hostname, to check whether it should use telnet or serial. If the serial port name is too long …
-
I'm trying to use rshell with my esp32, loaded with MicroPython_ESP32_psRAM_LoBo.
Mounting the SDCard works fine:
```
rshell -p /dev/ttyS12 -b 115200 -n
Using buffer-size of 32
Connecting to /dev…
-
My `rsync`, for example, takes 40 seconds or so with a very few folders. Partially because every single remote command resets the module and re-compiles (small) chunks of code.
-
### Checks
- [X] I agree to follow the MicroPython [Code of Conduct](https://github.com/micropython/micropython/blob/master/CODEOFCONDUCT.md) to ensure a safe and respectful space for everyone.
- [X…
-
Using rshell (0.0.28 from pip) to access the Raspberry Pi Pico: `rshell -p /dev/ttyACM0 --buffer-size=512`
When using `cp` or `rsync`, some files cause rshell to hang, but others work fine. I am no…
-
@dhylands - I run across a problem using `rshell`.
When there is *no* `board.py` file with `name='pyboard'` on the target system, the program exits with an error:
```
/Users/roland/workspace/rshe…
-
rshell 0.0.30 gets blocked at `Trying to connect to REPL` after I've used the device in Thonny (which leaves it in the raw mode).
I can reproduce this with RPi Pico and SparkFun ESP32 Thing on Ubun…