-
There are similar _methods in the `ModbusClientRTU` and `ModbusClientDeviceTCP` classes and so I thought I would do a comparison of the _read method to see if there's interest in creating something al…
-
## Scope
The aim of this project is to implement the missing functionality needed to interact with a [Modbus TCP Linux server](https://github.com/debevv/nanoMODBUS/blob/master/examples/linux/server…
-
I use this example script to communicate with Solax X3 G4 on COM port using RS485/ETH converter a then using modbus RTU over TCP protocol:
```php
```
* Environment:
- OS: Linux 5.10.0-vc…
-
It would be handy to have both MODBUS/RTU and MODBUS/TCP available in a single library. It looks like there could be a lot of code usable on both sides, so I started a closer inspection.
### Packet…
-
Im trying to query my [smart meter](https://stromzähler.eu/stromzaehler/drehstromzaehler/fuer-hutschiene-geeicht/246/sdm72dm-v2-mid-3-phasen-zweirichtungs-drehstromzaehler-mit-rs485-und-s0), with a US…
-
Hello!
I would like to say in advance that this is one of my first times working with the modbus protocol and, mostly, with Rust.
Recently I've been working with a PLC (Xenje XC3-24RT-E) and wan…
-
We are using Scada-LTS for polling remote RTUs on DNP protocol.
The following problem is observed:
1. Digital Input data is updating with no issues.
2. "Analog Inputs" type is working with 16 bit…
-
I have started the uModbus tcp server on **89.223.127.70:502** for online debuging of the clients.
Available registers from 0-150 for reading and 6-150 for writing.
Code:
```python
import logg…
-
The protocol is simply Modbus RTU (the serial protocol) or also just called "TELNET" tunneled over TCP at port 8080.
To read data "holding register" are read (that is the $03 byte after the Unit-ID…
-
Hi all
Last time I was trying to use the "mbpoll" program in my setup. The "mbpoll" is installed on UpBoard (mostly compatible with RPi board), on the board there is a custom RS485 hat. The TX/RX pin…