-
手工写入了一下,似乎引导不起来最新的rootfs
usb引导也是卡在最后。
```
gxl_p230_v1#setenv env_addr "0x10400000"
gxl_p230_v1#setenv kernel_addr "0x11000000"
gxl_p230_v1#setenv initrd_addr "0x13000000"
gxl_p230_v1#setenv dt…
laris updated
5 years ago
-
O大,我按照教程安装到emmc里,提示是成功的。关机把掉u盘后,n1只能启动到安卓机器人画面,无法启动emcc里面的armbian,请问是什么原因呢?
-
N1 盒子刷上Armbian_24.5.0_amlogic_s905d_noble_6.1.82_server_2024.03.16版本,并安装EMMC里面,登录后发现没有欢迎信息界面,找到这个文件/etc/update-motd.d,文件里面对比另外一个盒子X96MaxPlus,内容大小是一样的,登录后会有登录欢迎信息界面,请问开启登录欢迎信息界面?
N1盒子没有欢迎信息界面
![image…
-
I tried installing LibreELEC on a device that was and is running CoreELEC from USB. The reason for doing so was to see if there were eMMC drives in LibreELEC so that the eMMc could be erased before th…
-
Hello!
not work bluetooth оn mediabox mecool kI pro
wifi works
WiFi & Bluetooth chips а AP6255
Same poblem and solution in this request
https://github.com/ophub/amlogic-s9xxx-armbian/issue…
-
**Device Information | 设备信息**
- SOC: S905d
- Model N1
**Armbian Version | 系统版本**
- Kernel Version: 6.1
- Release: lunar
**Describe the bug | 问题描述**
安装docker openwrt无法打开luci界面配置
-
In NixOS 21.05, the ``hardware.deviceTree.base`` option can no longer be used. After trying to do some research, I figured out that the lines that I was using successfully:
```
hardware.deviceTre…
-
Subscribe to this issue and stay notified about new [daily trending repos in Shell](https://github.com/trending/shell?since=daily)!
-
O大,刚接触armbian,请教一下我也是N1的机子下了网页**Armbian_23.08.0_amlogic_s905d_lunar_6.1.36_server_2023.07.01.img.gz**固件刷U盘启动后全部按照操作更新内核也获取权限(sudo -i)了然后armbian-software要安装桌面系统(Desktop 201项)经过漫长的跑码之后貌似机器自动重启然后依旧还是在第一次…
-
我使用的设备是斐讯N1,原版的8G EMMc。在观察了分区容量足够的情况下,我试图减小boot和两个rootfs分区,以便给share分区留出大一点的空间。我尝试SCP登入后编辑/usr/sbin路径下的openwrt-install-amlogic文件,将#265至#272之间的内容更改为:
ROOT1="256"
ROOT2="256"
if [[ "${AMLOGIC_SOC}" …