-
Doing some quick testing using a Technisat Multitenne Dish which integrates a DiSEqC 1.0 switch and 4 LNB satellite positions will only give Astra 1 19,2:
```
AA Astra1 19,2 #dvb-s mux fr: 11953500,…
-
I'm more than happy with satip-axe and it runs perfectly together with OSCAM/HD+ and my TVHeadend server.
There is a tiny bug which seems it was introduced with satip 0.8: The signal strength and S…
-
I do have reduced the test to 2 channels, 1 good and a second bad (RTL7) channel.
If I switch back and for multiple times I end up with no picture on the good channel.
```
Das Erste HD;ARD:11493:HC…
9000h updated
3 years ago
-
Hi.
I've tried to tune into a high-bitrate DVB stream, supplied via udp-multicast ( 3 TV-Channels and 3 Radio channels). Ts-Reader, streamer and childpipe - all have the same behavior. The Channel…
-
#### VAAPIDEVICE SYSTEM INFORMATION REPORT
##### inxi
```
System: Kernel: 4.15.10-041510-generic x86_64 bits: 64 gcc: 7.2.0
Console: tty 0 Distro: Ubuntu Bionic Beaver (development b…
9000h updated
6 years ago
-
I use Open ATV on vu+ zero and assume that this is the code that is running there.
My satip client is stuttering a lot. Other clients do not experience this problem (e.g. VLC).
Does it make sens…
oxovi updated
2 years ago
-
I have tried out satip-axe and it works fine so far with tvheadend. However, with the original firmware a "miniDLNA Server" was included which could be activated/deactivated over the webUI. I assume t…
okurz updated
6 years ago
-
user.err: Mar 3 00:18:11 vdr: [986] [poller.c,118]: epoll_ctl(EPOLL_CTL_DEL) failed: No such file or directory
user.err: Mar 3 00:18:11 vdr: [986] [poller.c,118]: epoll_ctl(EPOLL_CTL_DEL) failed: N…
-
Hello, I am experiencing a problem when accessing the IP satip
DVB-S ADAPTER
TUNED TO
Offline
Unset
STRENGTH
SNR
BER
STREAMS
No open streams.
What can it be?
I'm using the clone DM500…
-
I ran a vdr-2.3.8 server with vnsiserver newest Git. Clients are
libreelec newest git. Both software is self compiled. The channels are supplied
by DVB-C devices and Sat channels by an satip server …