-
Hey man,
first of all thx for creating this guide. I discovered oranav's talk on the 34C3 a while ago but couldn't find a 0xF7 firmware to revive my S3 from the dead. Then I found your guide and gave…
-
Is this limited to the 7885 (apart from the gpio buttons) ? I'm trying to boot mainline on my s6 edge which has the 7420. Thanks.
-
I am developing a spring boot app and created a keystore file using pyJKS
I used a certificate, certificate_chain & private key
The keystore.jks file is generated successfully. But when i deploy…
-
If DFU_SEAL_LEVEL != 0 i recive state(10) = dfuERROR, status(4) = Memory erase function failed.
What i do wrong ?
cpu stm32f103c8
dfu-util -v -d 0483:df11 -D outfile.bin 0x8002000
dfu-util 0…
-
HI @BuddyZhang1,
The u-boot spl fails to build as it is missing some of the pregenerated .lds files.
It is possible that the git configuration was set to ignore .lds files as most of them are rege…
-
As the title says I have an A520F (Galaxy A5 2017). I am using Debian Testing's version of Heimdall (1.4.1-2+b1) but have also tried version 1.4.2 with the same results I'm about to describe. Basicall…
-
Hi there,
I got an old S3 (I9300) on my hands and started following [the guide from your blog](https://blog.forkwhiletrue.me/posts/an-almost-fully-libre-galaxy-s3/).
I flashed the "_boot part - …
-
I did sent you a couple emails. In general I like to port to S3
**Phone SPECS**
Chipset Qualcomm MSM8960 Snapdragon S4 Plus
CPU Dual-core 1.5 GHz Krait
ro.product.model=SAMSUNG…
-
Hi,
I got a Mstar based TCL TV has a sparse_write command, which is not supported. I try to modify some lines in utils and unpack.py, I finally got the img file but, when I use simg2img tool to conve…
-
[Mixpanel Notify draft metrics phases](https://docs.google.com/document/d/1OTTGVu3K_yiJEVWCkrhrTCbqwa_DNI31mS5NuJPyEaM/edit#)