-
I don't know how to change the example to work with circuitpython 8, I think this detracts from the usability hugely. I hoped i could just setup an MQTT client from minimqtt (set broker details) and p…
-
Hello, I have problem with setting up the AirQualitySensor device. I want to add CO2 measurement to the node. In the Matter Specification of the device type AirQualityMeasurement it is written that cl…
-
Hello,
I am trying to use a T-Display-S3 to monitor a Sensirion SCD41 (CO2 sensor).
Instead of using JST, I connected/soldered SDA to GPIO43 and SCL to GPIO44.
According to this issue, I though…
-
I am very confused with the temperature offsets. I think we have a problem with the logic, in some sensors...
I'm not sure what's going on yet, but something's not right... probably it's a mix of i…
-
Hi, i ordered 5 peaces here: https://www.laskakit.cz/laskakit-esp-vindriktning-esp-32-i2c/ together with the CO2-sensor (https://www.laskakit.cz/laskakit-scd41-senzor-co2--teploty-a-vlhkosti-vzduchu/)…
-
Support for e-Ink and e-Paper displays, such as Shareware. Preliminary work for the low CO2 consumption version of CO2 Gadget.
Developing actively with the following boards and displays:
- Lilyg…
-
It is needed to create a chassis and cable blueprint to create the conexions and layout of the devices.
-
So, this device **was working fine for a month**.
But suddenly, today, it would only read 0 ppm, out of the blue.
I programmed the **exampleUsage** code, to check, and I get:
```
Serial: 0x53CAB…
stolk updated
5 months ago
-
I have my SCD41 connected to Raspi, compiled the driver (OK), and started the example_usage. This is the outcome:
`serial: 0x0d41bf0734f`
`Waiting for first measurement... (5 sec)`
I am now wai…
ullix updated
7 months ago
-
When running near the end of the create process I'm getting an `StopIteration` error.
It almost seems to me like everything is successful, just that the upload process is failing, and I'm unsure if t…