-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### What part of EdgeTX is the focus of this bug?
Transmitter firmware
### Current Behavior
After updati…
-
### Board
ESP32-C6-WROOM-1-N8
### Device Description
| SD CARD PIN | ESP32-C6 PIN |
| MISO | 20 |
| MOSI | GPIO19 |
| CS | GPIO18 |
| SCK | GPIO21 |
| VCC | 3.3V |
| GND | GND |
##…
-
## [Delete before submission] Please use and reproduce the bug on the latest build from Github Actions (Artifacts)
**Describe the bug**
I cannot send a picture to a folder which is located on my SD ca…
-
Hello @RX309Electronics. If I read it correctly, you managed to damage your firmware and the watchdog reboots it all the time.
Have you tried to flash another firmware from the microSD slot?
Her…
-
### Creating a bug report/issue
- [X] I have searched the existing open and closed issues
#### Required Information
- DietPi version | 9.7.1 master MichaIng
- Distro version | bullseye
- Kernel…
-
Steps to reproduce the behavior:
1. Try to boot using the sd card port (i am using a 64gb sandisk ultra sd card)
**Expected behavior**
It will show that "factory instalation is aborted".
**Sc…
-
Is there any way to add SD card to the watch in order to store more data such as daily steps, running / activity time, alarms etc?
-
Has anyone tried out the actual version with SD-Reader?
Have no frequency output on clock signal. It's standing only on 3,2V (have no scope and could be too short impulse because errors) and so also …
-
### Prerequisite Steps
- [X] I have searched existing issues
- [X] This issue is not a duplicate of an existing one
- [X] I have checked the [EmuDeck Wiki](https://emudeck.github.io/)
- [X] I have re…
-
So I'm currently working a switch consolizer that relies on a custom made PCB that extends the SD card, I have several chipped boards but only one with a switch made 2040 and its unable to init the SD…