-
Hi there,
The lab i am apart of has decided to switch over to the LIQ HD to gain a more accurate drinking representation of our mice colony. We have also had a hanful of changes to the device top (…
-
## **Describe the bug**
### Firmware & Hardware
Using Firmware v0.13.10 on Marauder v6.1 hardware.
### The Issue
Navigating to Device -> Delete SD Files
This action does not result in a menu ch…
-
Other sensors are good, but audio recording always fails with some empty files. It may be successful once occasionally among several attempts. I have checked the SD card format and requirements. The p…
-
All the new SD cards need to be formatted with a boot image for use in the RoboRIO 2.0. We should also label each SD card while we have the chance.
Instructions can be found [here](https://docs.wpi…
-
Some CF cards and CF to SD card adapters appear to be causing an "Invalid MBR" error. The MBR appears to be incorrect.
![lwbfeib3i96c1](https://github.com/crozone/ipodloader2/assets/2499896/fcabf4e…
-
Ordered two LILYGO® TTGO LoRa32 V2.1_1.6. They would message each other just fine. Formatted and inserted a 16 Gig SD card for each. The Web Page/192.168.4.1 would not mount. I tried everything short …
-
There should be a recommended hardware documentation
- Low cost quick start setup
- Mobile or remote setup (maybe)
- Cost-effective high fidelity setup
Also recommended storage solutions (sd c…
-
I have been working on this, trying to get root shell and possibly RTSP without permanently needing SD card.
Please note that I have firmware V2.10.45, but looking at the squashfs, it seems very si…
-
I write the firmware directly from Visual Studio via USB to the controller.
This works 10 times. After that, copying the firmware is only possible via explorer. This is again a few times, then the SD…
-
When using a fresh SD card, the software does not acknowledge them unless you first format them. Is there a way to set the software to image brand new SD cards? I started writing a python script to do…