-
```
>>> "~20004644E00200FD35\r"
syssi updated
3 months ago
-
And exactly what I was looking for! I also have a battery BMS similar to Seplos I am monitoring :) If you have any time to refine more or even get it included in ESPhome that would be amazing! Cheers!…
-
I made my own firmware from the new sources and found a few bugs.
We have two Axpert Max hanging at home and one in the holiday home.
I also use “Solar Assistant” to control and set various function…
-
**Setup:**
2x Seplos BMS (nicht mit BSC) verbunden mit je einem NEEY 4A Balancer
Beide sind im BSC (auf ESP32-wroom Dev Board) auf BT ID 0 und 1 eingetragen.
**Problem:**
Der Neey auf ID 0 …
-
With later firmware versions (>2017) of the infini-/mpp-solar 10+15kw inverters, full bms support was implemented.
Only supported BMS I'm aware of is pylontech via RS485 bus. You need a extra modbus-…
-
Hi, could you explane me how decode the data please?
`~ 2 0 0 1 4 6 0 0 1 0 9 6 0 0 0 1 1 0 0 D 9 2 0 D 9 6 0 D 9 4 0 D 9 2 0 D 8 1 0 D 9 4 0 D 9 3 0 D…
-
### Describe the bug
**My Setup**
Victron Cerbo GX
Victron MPPT 250|100 Solar Charge Controller
Victron Multiplus-II 48/5000/70
Battery 1 - 280AH x18s LiFePo4, Daly 150A BMS, Parralel protection…
-
### Describe the problem
Dbus-serialbattery seems to start correctly, appears in remote console, communication to Jkbms occurs, but appears skipped because no device instance.
![image](https://g…
-
Hello,
i have a problem with crashing with the driver. It runs 3-4 weeks without any problems.
But then it could happen that for a short moment the connection to one of my 4 BMS (JBD)
is lost …
-
### Describe the bug
I’m facing sporadic disconnect issues after a while (sometimes one hour, sometimes a day or a bit more). Venus OS doesn’t recognize the disconnect as values don’t get updated. Af…