-
I have a AG Open Air O-1PST and on stock firmware all sensors are reporting but when I switched to https://github.com/MallocArray/airgradient_esphome/blob/main/airgradient-open-air-o-1pst.yaml a numbe…
-
I'm experiencing erratic uptime. Latest version 2.0.1 installed from day one. I didn't use the AG with it's factory firmware. I need a more stable connection in order to activate the ventilation fans …
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
### REQUESTED INFORMATION
_Make sure your have performed every step and checked the applicable boxes before…
-
I have multiple Airgradients in my home. I noticed the measurement of the Sht4x are off compared to other (multiple) temp/hum in the same rooms (by more than 2-3 degrees c.). After doing some searchin…
-
Hello,
First of all, thank you very much for your work, I just discovered it and it is fantastic.
My version is TasmoCompiler v11.4.0
I have this problem when trying to compile version 13.4.0 in S…
-
Hi guys
We are using SGP41 together with ESP32(ESP-IDF framework) and everything is working fine for powered devices.
Now we are looking into implementing the SGP41 on low power mode. The ESP32…
-
**Describe the problem you have/What new integration you would like**
Add support for the ens160 air quality sensor.
**Please describe your use case for this integration and alternatives you've …
-
## Describe the bug
When multi page is used, unable to connect from ESPHome or Home Assistant.
Device seems to be functioning ok, and updates values on the screen as expected. Does only seem to swit…
-
**Is your feature request related to a problem? Please describe.**
The SGP40 and SGP41 gas sensors report VOC as an index. The index is unit-less and bounded between 0–500 steps from the best t…
-
I'm getting this error when trying to compile your configuration:
```
INFO ESPHome 2023.12.8
INFO Reading configuration /config/esphome/airgradient.yaml...
WARNING Found '${name}' (see esphome->…