-
Hi all,
I have a small problem, my spindle starts turning when I press the eStop button. Surely because the eStop is wired to reset (and change the state of relay pin). How to solve this problem? I…
-
#### Description
With iOS/Safari some buttons doesn't seem to work. For example the button to colapse a widget or the button to toggle the webcam.
#### Versions
- CNCjs: 1.9.14
- Node.js: 6.…
-
Can xenovacivus be rewarded for what it is now and bribed to make a few changes?
NSDev updated
9 years ago
-
Background:
I just learned to make bowls on a lathe. So I wanted to engrave the inside and/or the bottom of the bowl. The rectangular shaped probing area, as defined in the AutoLevel GUI, often creat…
-
Hi, it would be great if the tool change workflow could be improved in the following ways:
* Capture a tool change location in machine coordinates that gSender goes to prior to the change, similar …
-
I have a number of Macros I use for a multiple station complicated job. It would be extremely helpful to be able to run macros directly from shop floor tablet.
-
Hello, hopefully someone is willing to help me. I recently bought a CNC, finished putting it together, and now ready to design something. This is what it says for me to use, Designed to use GRBL fir…
-
Hello,
yesterday I get a SerialTimeoutException: "Write timeout" that I never received before. Since impossible to connect to the smoothieboard. I made installation with "pip install bCnc". Note I ca…
-
When I select "Choose File", the cursor turns into a double headed arrow. I expected a file browser window. Is this what is supposed to happen?
-
Hi everyone! You're doing an amazing job and I'm wondering if G-Code can be streamed "wirelessly", maybe with a ZigBee node attached to the USB port of an Arduino with an adapter (i.e. the XBee Explor…