-
- Arduino board: Adafruit MagTag (black silkscreen)
- Arduino IDE version (found in Arduino -> About Arduino menu): 2.2.3
- List the steps to reproduce the problem below (if possible attach a …
-
The bottom silkscreen is different from the top silkscreen for all the stepper connector
-
add pin out of P1 and CN3..CN5 in silkscreen of PCB to allow easier conection with Arduino.
-
Can you also supply the silkscreen for the keys? I would like to print them with other color instead of the light-grey and orange, since the orange color almost disappear with dimmed warm light.
-
The pinout diagram lists `RXD` as `P0.26`, and the silkscreen says `P25`. `P0.25` is the bottom most GPIO on the other side, also labeled `P25`, so I imagine the silk for the RXD pin should be `P26`
-
- Silkscreens got moved to under the datamate connectors so they aren't visible
- Buzzers interfere with mag switches, they need to be moved further away
-
1. 실크 액 선정하기
2. 기본 티 소량 제작 / 소량 구매ㅔ
3. 티셔츠 넘버링
4. 색감 감각
-
Hello,
I am not familiar with the silkscreen marking for the diode. Which way should it be placed?
Thanks!
-
Are the GPIO pins GP0-GP11 of the RP2040 accessible on the board?
Are the pin numbers on the silkscreen compatible with the RP2040 datasheet?
cf: https://datasheets.raspberrypi.com/rp2040/rp2040…
-
I created a CAM File for the Export of Eagle since the Standard Eagle Gerber Output now uses the same file ending for all Files.
**It outputs the following Files files:**
- Bottom Paste ( bCrea…