-
### Answers checklist.
- [X] I have read the documentation for esp-protocols [components](https://github.com/espressif/esp-protocols#readme) and the issue is not addressed there.
- [X] I have updated…
-
In the following file:
https://github.com/Xinyuan-LilyGO/T-SIM7600X/blob/master/schematic/T54_SIM7600_20201012.pdf
In page 2, there is a section with the audio chip NAU8810. According to the datas…
-
Hello, @LilyGO @lewisxhe
I have the NA version of the SIM7600 and it doesn't seem to return the GPS coordinates. I have tried with the AllFunctions.io (AF) program as well as just issuing the follo…
-
I am using LILYGO T-SIM7600G, a controller combined with T-SIM7600G and ESP32. I am able to get network from sim card using "modem.simUnlock(GSM_PIN)".
However, when I am trying to use "modem.netwo…
-
Following the documentation, and also relevant discussion found in https://github.com/Xinyuan-LilyGO/T-SIM7600X/issues/49. While I am able to connect to plain, non-TLS brokers, trying both `broker.emq…
-
Hi @RoEdAl
i'm tryting to compile chan-quectel for OpenWrt Snapshot (Banana BPI-R3-Mini, that is corrently not supported by 23.05).
I've compiled the SDK and followed instruction under openwrt fo…
-
Hello there,
I just purchased RPi3 a week before and trying to connect GSM SIM 800 module using serial ports (pin 8, 10).
Initially I am trying check serial ports by connecting pin 8-10 and using min…
-
I cannot seem to be able to put the modem in sleep mode.
- `AT` returns OK.
- `AT+CSCLK=1` is submitted sucessfully.
- DTR pin is set high, I checked voltage on the pad of the chip itself.
Are…
-
If no decoding chip onboard can you still accept a incoming call and DTMF tones?
https://github.com/Xinyuan-LilyGO/T-SIM7600X/issues/31
I can ring the SIM and see "incoming call" but doesnt answ…
-
hi,
on a PCIE-SIM7600x module there are GNSS, MAIN and AUX connectors.
GNSS and MAIN i know what it is good for, but what is AUX?