-
I am working on a binding to support the Tesla T-Smart Smart Immersion Heater / Thermostat device https://www.tsmart.co.uk/.
The device allows monitoring and control over the temperature and heatin…
-
Creating a home assistant climate thermostat for the heating
Current state: existing but not finally bug free...
Todos:
- [x] Sensors:
- status_sensor='calculations.ID_WEB_WP_BZ_akt',
- c…
-
-
Right now hvac_mode is the preferred source of truth for the header icon. Personally, I would rather have the icon follow the state attribute. (Which it already does as a fallback).
Why do I want t…
-
**Describe the bug**
I'm using a header toggle with a lock entity (provided by a tuya TH213 device).
The action to enable the lock, does not lock.
If i lock using the lock-entity, it does not show …
-
@markchalloner , hope you are well.
I am doing some significant rework of this integration to reduce the code base and make easier to maintain. As part of this, I am reworking some of your code fo…
-
This change would introduce the capability to link the underlying state of the heating system (e.g. 'heating', 'off') to the state of radiator valve.
It could work initially by getting the boiler s…
-
When setting min_cycle_duration to either seconds: 120 or minutes: 2 I get the same results with my cooling turning off/on every few seconds if the temperature is close to the setpoint.
Is there s…
-
In the case of an underfloor climate control system, the same solenoid valve controls both heating and cooling. In this case it is not possible to use dual smart thermostats in automatic mode because …
-
Some "by default" values are wrong for LiFePo4 batteries:
![image](https://github.com/Sleeper85/esphome-jk-bms-can/assets/156140720/50c602e7-61df-4677-b7d0-cd88963ce900)