-
**Are you reporting a successful flash?**
no
**Do you have a question about configuring your newly flashed device?**
no
**Did you have issues getting a device to flash?**
yes
I tried to fl…
plin2 updated
2 years ago
-
之前使用2.0.0版本,程序调好没有问题,后面升级为2.1.1,发现调用新版的smartconfig库(2.5.5)smartconfig_start()函数之后再调用vTaskDelay()函数出现时间错误,延时时间变为原来的1/2。
SDK采用2.1.1,将2.5.5版本的smartconfig库更换为2.5.4版本后没有出现错误,这里推断2.5.5的库有问题
-
Hi @EspressifApp,
I have a Wifi Router can't setup smartconfig in Android 9 or 10 while Android lower and IOS working fine. Android 9 and 10 still working for other Router but this is not. I have b…
-
问题:
SmartConfig一直连接不上, 尝试使用Anroid客户端可以正常连接
重现步骤:
1. 将硬件至于SmartConfig模式
2. 使用最新的iOS App选择2.4G WIFI信号, 然后连接
3. 搜索了一段时间之后,然后提示找不到设备
4. 使用Android使用同样的步骤进行操作, 可以连接成功
期望
Smart…
-
Hi,
In the first place thank you for publishing / sharing your repo!
Downloaded your repo. Using the Flash download tool I flashed the ```M5StackMultiApp.bin``` firmware first.
Then, using VSCode …
-
I'm experiencing a issue to flash a "LSC Smart Led RGB GU10 380 lumen" (Sold in the Netherlands as "LSC Smart Connect slimme multicolor spot" [(https://www.action.com/nl-nl/p/lsc-smart-connect-slimme-…
-
Alright people i have dug into this one as far as i can so looking for some help. attached are my logs and the error i have gotten.
I'm running Ubuntu 20.10 on Intel NUC utilizing a linksys wusb630…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
I have 2 CE Smarthome Dimmers I bought from Costco some time ago and can't get them to connect to the Tuya Convert AP, which just times out, only seeing my phone connected.
The AP is running on Lin…
hoatz updated
3 years ago
-
http://iot-fans.xyz/2017/11/15/alios/netmgr/intro/