-
Hello,
I attached both temperature sensor and extnernal bistable switch to sonoff basic.
If bistable switch is ON (loop closed = GND is connected to GPIO1), then after powering off sonoff it won…
-
- Operating System: Ubuntu 20.04
- Python Version: 3.8.2
- Sonoff model: Basic R1 433 mhz
- Sonoff firmware version: no idea
The TLS 1.1 flag is not working for me and causes errors like
```…
-
Great job!
I consider upgrading my both garage door and gate.
Why don't you connect reels directly to Sonoff Basic pins? (which are commonly used for flashing f/w)
Tasmota firmware has an abili…
-
Hi,
I updated the sonoff to version 3.3.0
I create the dedicated wireless network with computer and sonoff (which I see correctly).
I open the tool_01DIY85 but I don't see the sonoff.
what am …
-
- Operating System: windows 10 64 bit
- Python Version: 3.7
- Sonoff model: basic
- Sonoff firmware version: 2.6.0
When i start sonota.exe I input wifi and password of my home network. then …
-
Hi, first of all, many thanks for your awesome integration. I'm from Italy. Starting from a HA core upgrade to 2024.5.4 (the first I tryed in may, same issue with 2024.5.5) all of my sonoff devices, T…
-
Hello there! I am really don`t know where i should ask, so I ask here.
I have Sonoff Basic R2 with 3.5.0 firmware and I am going to use it at LAN without chines cloud. So, I need to switch it to DI…
-
We already Know that the Sonoff Basic R2 does not expose the GPIO 14 and that the GPIO 2 (dificult to solder) can´t be pressed on boot,
So It´s possible to create a version for the Basic R2 that use…
-
I flashed one sonoff basic r3 with the RavenCore 1.0 release. All process was looking ok, but after finished the device didn't do anything more. No lights at all, also removing the Diy Mode jumper.
…
-
Firstly, thanks for the great work on Ewelink-max. My Sonoff Touch and Sonoff Basic switches are working perfectly in Homekit.
I have a Sonoff SC https://www.itead.cc/sonoff-sc.html and would love…