-
Had a bit of trouble writing to SPI flash to begin with, found this command worked with a generic chinese usb-blaster. Haven't seen this in the readme or anywhere else, forgive me if I'm wrong.
`o…
-
Tried to use platbox_cli in linux, it seems to work, at least dump_spi retrieves correct bios flash content and chipset command shows some info similar to screenshots in the project's readme.
But c…
-
I am trying to read the flash chip using a ch341a programmer and I get the following response:
I ran the command sudo flashrom -p ch341a_spi -r flash.bin
Found ST Flash chip "Unknown ST SPI chi…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Board
ESP32-S3-DevKitC-1-N-32R8V
### Device Description
ESP32-S3-DevKitC with only USB serial cable attached.
### Hardware Configuration
n/a other than onboard RGB used in sketch.
…
-
```
salsasteve in 🌐 thinkcentre0 in microflow-rs/examples/esp32 on main [!] is 📦 v0.0.0 via 🦀 v1.79.0-nightly took 8s
❯ cargo run --example person_detect --release
Finished `release` profile …
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
I ran into a problem when reading data through QUAD SPI.
I use discovery board MB1209D with STM32F412ZGT6U and 128 MBIT QUAD SPI flash NOR memory N25Q128 (Micron).
When I read the last block (s…
-
A user on the forum has requested support for flashing the SPI flash on RockPi for EtcherPro:
https://forums.balena.io/t/etcherpro-progress-updates/23741/37
We would need to port this tool to js, …