-
Only raise issues for problems with the library and/or provided examples. Post questions, comments and useful tips etc in the "Discussions" section.
To minimise effort to resolve issues the followi…
-
Hello. It really bothered me that the picture was not clickable, I suffered and fixed it, added arrows to the top and down by copying them from the buttons and changing the drawing of the arrows thems…
-
Tried using your library on a WeMos D1 mini running MicroPython v1.8.138
Almost works. Calls to `self.write_cmd()` are failing as it requires a buffer.
```
>>> import st7735
>>> import tft
>>> from m…
-
Thank you very much for implementing this project; I came across it after a long research regarding my Weinor blinds...
As described in the instructions, I obtained and soldered a C1101 radio module …
-
Hello
Model Escam PVR008
Board S834-A0-B
Sensor JX-F23
CPU Hi3518ERNCV300
Network Realtk 8188ETV (M8188FU3)
https://github.com/OpenIPC/openipc-2.1/issues/40
commit 09d1720331967b5a8db28c73f…
-
This library was probably written before the new SPI transactions protocol was published, but without that protocol, this library only works if the display (in my case, the ILI9341) is the only hardwa…
-
via conversation with @ajfisher on gitter:
There was a pull-request for SPI opened a while back: firmata/arduino#135. However, it's going to be more complex than just wrapping the Arduino SPI api (si…
-
### Before reporting an issue
- [X] I have read and understood the above terms for submitting issues, and I understand that my issue may be closed without action if I do not follow them.
### Area
i…
-
These 2 FPGA bugs are currently accounted for in the pi software, but posting here so they are documented (and eventually resolved).
- first byte of audio FIFO buffer needs to be flushed on reset.
…
-
After flashing the MinnowBoard Turbot with Intel Firmware Engine 3.0 generated firmware, the board boots however I'm unable to flash new firmware with the error 'Spi Protocol is not found' given by th…