-
First, of all, thanks a lot for the amazing python binder for SPSR!
I am using Ubuntu 20.04, python=3.7.3, cython 0.29.12, GCC 7.3.
Following the readme file, I have successfully installed it. H…
-
/Users/x/Documents/Arduino/libraries/Adafruit_WS2801/Adafruit_WS2801.cpp: In member function 'void Adafruit_WS2801::updatePins(uint8_t, uint8_t)':
/Users/x/Documents/Arduino/libraries/Adafruit_WS2801/…
glued updated
10 years ago
-
I got an output like "oops could read 0x80000000 = 18" on the execution of "usertests."
I guess the memory attributes (like domains?) or improper settings about the mmu cause the problem.
-
[This file](https://github.com/OpenModelDB/open-model-database/blob/main/src/lib/architecture-data.ts#L14) is incomplete, I think. Check that the compatibility data is correct and fill in any gaps.
…
-
you mentioned "**_when we enter el1_entry function the execution should be already at EL1 mode._**", but
`
int el = get_el();
printf("Exception level: %d \r\n", el);
`
the code shows it is e…
-
# Description
The test_seteuid tries to seteuid to an arbitary user id (9999 in this case). And then set it back to 0.
It fails upon first call to seteuid, with trapframe printed. See "current resul…
-
# Description
test_clone.c fails. The father process calls "clone" function and gets pid of its child process. But something goes wrong before father finish "waitpid" function.
# Reproduce Steps
…
-
x0: 0
x1: 405f27a8
x2: 74
x3: 40c000c0
x4: 1
x5: 1
x6: 1
x7: 1
x8: 1
x9: 0
x10: 40c100c0
x11: 2ff0000000000000
x12: 7e
x13: b0
x14: 408001b0
x15: ffffffff
x16: 405d4f18
x17…
-
I'd like to build a complete trusted boot (for educationnal purpose) on a raspberry pi 3 B. However I can't get the ATF to load U-Boot as bootloader (not getting past BL31 when it tries to get to BL33…
-
**Describe the bug**
WiFi client stops working and does not recover (Cypress firmware crashes). This happens to my RPi4 almost every day and I must reboot to recover it. After reboot, it always wor…