-
## Issue Description ##
I am trying to use srsUE to connect to open5gs via zeroMQ, according to this article: (https://docs.srsran.com/en/latest/app_notes/source/5g_sa_E2E/source/index.html)
However…
-
Hello, I am trying to use srsUE to connect to open5gs, according to this article: (https://docs.srsran.com/en/latest/app_notes/source/5g_sa_E2E/source/index.html)
**However, the PDU session cannot be…
-
## Issue Description ##
I run srsUE 22.04.01 ( `ce8a3cae171f08c9bce83ae3611e56f2d168d073` )
and I can't get the connection to be stable / last for more than a few seconds.
## Setup Details ##
…
-
This may fix a build issue newer versions of linux are hitting. I gave it a shot and it doesn't seem too hard except for rrc.cc, which has been moved and modified quite a bit. There might only be a fe…
-
## Issue Description ##
Connection over wire works but only the first time I attempt to connect UE and eNB. If I disconnect then reconnect all future attempts until I turn off everything for more tha…
-
## Issue Description ##
Dear srsRAN commity.
First of all I want to thank you for this wonderful project.
I've been installing srsRAN_4G from code with zmq as RF device and it's working great. Howe…
-
## Issue Description ##
The appnote specifies that the 5G SA UE is limited to 10 MHz. Is it only able to support 10 MHz, or can it also support 5 MHz?
## Setup Details ##
Changed working 10 MHz 5…
-
## Issue Description ##
I'm trying to connect LimeSDR-USB with srsUE on a linux PC to a real commercial LTE network, using a pcsc card reader to read a real commercial sim card. srsUE can find the …
-
## Issue Description ##
issue with srsUE sometimes get stuck in reading data from RF.
did somebody tested srsUE with BladeRF 2.0 micro xA4 ?
if yes, wich versions of firmware, libbladerf, srsRAN
…
-
## Issue Description ##
I'm trying to execute the srsRAN gNB with srsUE tutorial using my usrp x410 as srsUE. This is the error:
Active RF plugins: libsrsran_rf_uhd.so
Inactive RF plugins:
Readi…