-
I happens to buy a ts100 with broken firmware, after connecting it to pc it wasn't able to install driver, like the data lines was broken (they're not). So after some research i bought a St-link v2, b…
-
Hi all!
I’ll describe it briefly... stm32f401re6 was installed, flashed with st-link, first flashed - stalkb-bootloader.hex then stm32f401-usb-keyboard-amiga.hex. everything went through the check wi…
-
bad CPU type in executable: ./backend-rust/web-rwkv-converter，macos 14.5 ，3.6 GHz 十核Intel Core i9，AMD Radeon Pro 5700 XT 16 GB，无法使用webgpu转化，请问是不支持吗？
-
AFAIK, there are three official variants: ST-LINK, ST-LINK/v2, ST-LINK/V2-1. For all three, there exist various firmware version.
A non-free update utility for the non-free firmware can be found at:
…
-
I'm new to building and SMD components to pcb and have run into a problem trying to load the firmware to the STM-32 module. Attached is a photo of the error I'm running into, plus the front and back …
-
From reading #20 it seems I could use this on the Aliexpress nRF51822 beacon chips by simply taking the existing firmware.bin and replacing the string with the advertisement key.
Could this process…
-
I am getting a strange error message running a very simple call `tm_shape(inter)+ tm_borders()`:
> `Error in sort.int(x, na.last = na.last, decreasing = decreasing, ...) : 'x' must be atomic`
…
-
Hey everyone!
I'm trying to flash using a 36V TSDZ2 with XH18 display. The program seems to compile just fine but I am not able to get it to flash.
![Screenshot 2024-08-11 143102](https://githu…
-
After struggling a lot with the newest revision and many hours of trial and error this is the solution.
I have done this with MacOS but it should be the same on Linux. Feel free to convert the guid…
-
when I start to enter the program, the st-link V2 app said"file size is bigger than the flash memory size!!!!
who can help me solve this problem?
19:50:32 : ST-LINK SN : B55B5A1A0000000039CF…