-
- [ /V3] Programmer/board type: [enter here] (e.g STLINK /V1, /V2, /V2-onboard, /V2-clone, /V3)
- [Ubuntu ] Operating system an version: [enter here] (e.g Linux, Windows)
- [1.8.0 ] **stlink tools v…
-
xPack OpenOCD x86_64 Open On-Chip Debugger 0.11.0+dev (2021-10-16-21:19)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
debug_level: 1
hla_swd
…
-
Hi. It seems like [this issue](https://community.platformio.org/t/jlink-uploading-to-incorrect-address/6085/3) is still present.
When using stlink to just upload the file it's flashed at the wrong ad…
-
Hello,
I just flashed my bluepill with hid_generic_pc13.bin. It seemed to flash properly. But I can't load a sketch. Can there be a verbose output?
Configuration
Windows 7 Pro 64 bits
Arduin…
-
```
What steps will reproduce the problem?
1. Plug in a STLink
2. Attempt to use it immediately
3. Hilarity ensues
What is the expected output? What do you see instead?
You expect to be able to use …
-
- Vscode version: 1.44.2
- Platform IO core: 4.3.1
- platformio.ini file:
[env:stm8sdisco]
platform = ststm8
framework = spl
board = stm8sdisco
upload_protocol = stlink
![image](https://use…
-
I am using a NUCLEO-L476RG board, and I have removed the CN2 jumpers, which would use the ST-Link instead of the Nucleo. When I run a flashing command with the following command line:
`pyocd flash mb…
-
### Environment
- OS and version: Windows 10
- VS Code: 1.70.2
- C/C++ extension:
- OS and version of remote machine (if applicable):
- GDB / LLDB version: arm-none-eabi-gdb GNU gdb (Arm GNU T…
-
```
What steps will reproduce the problem?
1. Plug in a STLink
2. Attempt to use it immediately
3. Hilarity ensues
What is the expected output? What do you see instead?
You expect to be able to use …
-
```
What steps will reproduce the problem?
1. Plug in a STLink
2. Attempt to use it immediately
3. Hilarity ensues
What is the expected output? What do you see instead?
You expect to be able to use …