-
OS: MacOS 10.12.16
pyOCD: 0.21.0
Devices: nRF51-DK, F042k6, Disco-L475, Nucleo-F446, etc.
When multiple devices are connected, the `uid` switch needs to be provided in order to target the correct…
-
# Intro
This is a followup on https://github.com/jeanthom/openocd-dirtyjtag/issues/2#issuecomment-769485719, focusing a working setup with DirtyJTAG+[Espressif ESP32S2 Saola-1 dev board](https://do…
-
### Configuration
**Operating system**:
Linux x86
**PlatformIO Version** (`platformio --version`):
pio --version
PlatformIO Core, version 6.1.11
I've read the release note: "Resolved a…
-
Hi,
I have a 3 year old redox wireless v2 from falbatech and tried to flash the firmware on the chip. However I can't get the openocd container to start up correctly.
I have never flashed somethin…
-
Right now it is very hard or impossible to find scheme for connecting nrf52 to TSDZ2. A lot of links are 404.
stsdc updated
3 years ago
-
I saw the same problem（ #1121）
in use Ubuntu (Linux w-VirtualBox 5.19.0-46-generic #47~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Wed Jun 21 15:35:31 UTC 2 x86_64 x86_64 x86_64 GNU/Linux)
When I run pyoc…
-
https://github.com/devanlai/dap42 supports STM32F103 but no hardware design or just a mere pinout is available.
ildar updated
5 years ago
-
IMPORTANT NOTE: This is a new problem with existing code that worked fine before updating `platformio`. Something in either an updated framework or platform is causing this.
`platformio.ini`:
`…
-
Hello , Love the app! on my aging 20.04 install the latest sources fail to connect;
Verbose level: 3
Version: 1.3.0
222 - Warning: libpng warning: iCCP: known incorrect sRGB profile
263 - Warnin…
-
Hello. Haven't been here in a while. With past experiments, I burned a few stones and abandoned the dso. Let me remind you that I have a fake fee. one of the first. without stabilizers 7905 and 7805. …