-
Hello Alex,
i am playing around with an STM32 and the STM32duino framework. So if i using for example the Pin PB7 as an output it is sometimes hard for me to get the resulting pin number and thus i…
-
Akin to https://github.com/stm32duino/STM32RTC
-
Hi !
I have error with compillation keyer code for STM32 Blue Pill board:
-----------------------------------------------
C:\Users\r5au\Documents\Arduino\k3ng_cw_keyer-master\k3ng_keyer\k3ng_ke…
-
This fails to compile the MPU9250 example using this library with either SPI or I2C examples.
It seems to be unhappy about the round macro .
Here is the log from the Compiler
Arduino: 1.8.19 (L…
-
When I use this MPU6050 library, STM32(Bluepill) does not work under the Arduino framework of PlatformIO ide.
I can find the address of mpu6050 through I2C detection program, but there is an error wh…
-
```cpp
#include
SoftwareSerial mySerial1(PA10,PA9); //(rx,tx)
String d = “123123123”;
void setup() {
mySerial1.begin(9600);
mySerial1.print(d);
}
void loop(){
}
```
**The serial port can…
-
Hello EveryOne,
This is a minor and non critical modification. The problem is in the following:
when a user uses "build.variants_dir" at a board manifest then this script platfrormio_build.py comp…
-
I'm missing an EEPROM emulation like on STM32duino
-
add/test support for the Ugly board:
http://wiki.stm32duino.com/index.php?title=Ugly_board
-
Dear all,
I followed all the steps in this guide and could access the REPL prompt a few times. However, most times the board is not properly detected (showing "Error 43" in Windows device manager).…