-
Add debugging support via OpenOCD and GDB (or some other custom debugger).
```
sammy debug /path/to/firmware.elf
sammy debug --platform="stm32f10x" /path/to/firmware.elf
sammy debug main.cpp
…
-
https://help.github.com/articles/adding-a-license-to-a-repository/
-
What kind of issue is this?
- [x] **Feature Request**.
------------------------------------------------------------------
**PlatformIO Version** (`platformio --version`):
PlatformIO Core, vers…
-
eMote v. 1.0.12, powered by USB. When the Kiwi accelerometer is connected to the .NOW I2C lines the driver hangs. There seem to be side effects wrt the LCD.
-
STM32中,每一个GPIO都可以触发一个外部中断,但是,GPIO的中断是以组位一个单位的,同组间的外部中断同一时间只能使用一个。比如说,PA0,PB0,PC0,PD0,PE0,PF0,PG0这些为1组,如果我们使用PA0作为外部中断源,那么别的就不能够再使用了,在此情况下,我们只能使用类似于PB1,PC2这种末端序号不同的外部中断源。每一组使用一个中断标志EXTIx。EXTI0 – EXTI4这…
cisen updated
4 years ago
-
From the adtim driver in master, the following code attempts to enforce a minimum delay in timers.
```
static void set_compare_lower_16(UINT64 target) {
...
// Don't attempt to set a timer for le…
-
I have recently acquired a few STM32F103C8T6 (Cortex-M3) & STM32F030F4P6 (Cortex-M0) mini boards, would you mind adding CMSIS / SPL support for those to this platform?
I see the STM32L1, STM32F3, ST…
-
have a lot of issue trying to compile a working version the firmware for the Geeetech a30m with IAR.
I have followed all tutorial I could found and I still have no success.
I successfully compi…
-
## References:
[ESP8266 - WiFi Module (COMPONENTS 101)](https://components101.com/wireless/esp8266-pinout-configuration-features-datasheet) - _This site was used in order to understand the HC-SR501…
-
Easylogger 一些代码并不是可跨平台移植的,导致可移植的代码和port之间界限不是很清晰
比如elog_file.c使用了libc fopen/fwrite这些函数,虽然libc是标准的,但实际情况是很多嵌入式平台上没有,而使用的如fatfs, littefs等FS接口。进而要求用户手动改elog_file.c文件,其中关于file rotation的部分比较容易出错。最近在一个平台…