-
Hey Kris, I am new to arduino and IMUs in general and learning as I go. I am using versions of you code, which I have adapted to take any number of IMUs. I am working on a wearable device which might …
-
Hi!
I did a lot of testing and it seems the code doesn't work on STM32L boards with Arduino.
I get everything up and running using an Arduino Nano, so both the SD and the connections are fine. I…
-
**Describe the set-up**
I'm using a NUCLEO-L476RG with Zephyr ([`f51c8ee739`](https://github.com/zephyrproject-rtos/zephyr/blob/f51c8ee73906e7414c7ff1c30e71978437616e71)).
**Describe the bug**
…
-
https://github.com/supperthomas/rt-thread/actions/runs/5400782999
-
## Introduction
The stm32 mcu has several external wakeup pins (GPIO) that are able to trigger a wakeup from Standby or Shutdown low power modes.
The WakeUp pins are fixed GPIO pins.
Each WakeUp p…
-
I received the error below on my device that uses the STML476 MCU. The device uses an LPC11U35 for drag and drop flash programing. The drag and drop update no longer works since this error is occurrin…
-
Hello!
Although the build and the renode test is done successfully for the target STM32F407, when I do the build and test with renode for the STM32L476 target the build is done successfuly but when I…
-
**Caution**
The Issues are strictly limited for the reporting of problem encountered with the software provided in this project.
For any other problem related to the STM32 product, the performance, …
-
From https://github.com/zephyrproject-rtos/zephyr/discussions/68423#discussioncomment-8379966
@erwango
^^ @FRASTM
I also noticed that "requires-ulbpr" is not implemented in stm32-qspi-nor driver…
-
Hello-
We recently attempted to compile this code under CubeMX but failed. The intended chip is the STM32F411. After using CubeMX to generate the project and adding the CherryUSB files our version …