-
**Set-up**
* The board: nucleo H7A3
* IDE: STM32CubeIDE/MX
**the bug**
Code generator does not generate line HAL_PWREx_EnableUSBVoltageDetector() which causes USB device is not being detected/…
xRadx updated
3 years ago
-
**Set-up**
* NUCLEO-G0B1RE
* STM32CubeMX with `Makefile` selected as `Toolchain / IDE`
**Description**
When setting up a USB-PD project – STM32CubeMX does not generate the needed static librar…
-
I am developing an application currently running on STM32L432 KC Nucleo reference board. I have created an STMCubeMX startup file and simple application that works flawlessly. I can program and repro…
-
**Describe the set-up**
* The board : H745ZI-Q
* IDE: StmCubeIde
**Describe the bug**
SPI using DMA is not working using Stm32CubeMx, call back is not triggered, no errors.
**How To Repro…
-
Definition of done:
- [x] project contains source code generated by STMCubeMX
- [x] project builds with CMake
- [x] CI jobs run on GitHub and [Travis CI](https://travis-ci.org/)
- [x] [CodeFacto…
-
- [X ] **PlatformIO Core**.
If you’ve found a bug, please provide an information below.
------------------------------------------------------------------
### Configuration
**Operating…
-
Configure Simulink - STM32 build process.
-
i've got error compilation when make base main:
/usr/lib/gcc/arm-none-eabi/7.3.1/../../../arm-none-eabi/bin/ld: build/gw_base.elf section `.lcd' will not fit in region `DTCMRAM'
/usr/lib/gcc/arm-n…
-
Hi,
I saw that this Issue was already solved (It's the problem that the COM port after resetting the board isn't recognized) with the nucleo32 L432K card, I have the same problem but for a board th…
-
I'm getting the following error:
`Error: Unable to access jarfile C:/Program Files/STMicroelectronics/STM32Cube/STM32CubeMX/STM32CubeMX.exe`
My installation is in the x86 folder:
`C:\Program Files …