-
apa102 module is not available in firmware.
Uploading a generic Dotstar driver (https://github.com/RobertJBabb/micropython_generic_apa102/blob/master/generic_dotstar.py) allows the LED to be access…
-
I have uploaded a sketch that transforms my lilygo ESP32-S3 in a USB keyboard and mouse emulator
The sketch works, but I can't upload a new sketch as the serial port is then disabled.
How can I eras…
-
### What version of Music Assistant has the issue?
2.29
### What version of the Home Assistant Integration have you got installed?
2024.10.1
### Have you tried everything in the Troublesho…
-
File exists and is valid. I can load significantly larger files than the one that makes Thonny fail.
Some things I tried:
If I download the file to the PC, I can open it in Thonny....
Soft re…
-
hi and thanks for this awesome library :+1:
I'm the maintainer of [ESP32-USB-Soft-Host](https://github.com/tobozo/ESP32-USB-Soft-Host).
This library does not use tinyUSB, nor does it use the bui…
-
Look into lowering component lock time.
-
Sorry for littering your issue list, but I wanted to ask whether using the method you explain in this repo would be possible to enable connected standby in S0? I have a GA402RK (2022 G14 model I belie…
-
Dont seem to be able to use this stick? as its a a 14 digit serial number with letters and numbers, any suggestions?
-
### The problem
Hello,
board: Lolin ESP32-S3
I'm trying to get the LED (WS2812) on the board to light up. But it doesn't want to compile with that exact pin(gpio 38).
Thanks in advance!
### W…
-
I am using this integration now for several month on my Deye 12K inverter and have observed that received values for different entities (sun12k-pv2_power, sun12k-battery_capacity and a lot more, but n…