-
Hi,
Since the firmware update on the tapo p110, it has been impossible for me to reconnect it with companion. And I don't know what could be the problem, and also with other versions of companion it …
-
According to the pull request https://github.com/AlexxIT/go2rtc/pull/1029, H200 sub devices should now be supported. However, I have been unable to configure this correctly.
H200 Firmware: 1.2.21 B…
-
ich habe 3 Tapo Steckdosen, die auch offensichtlich erkannt werden, aber die Verbindung kann nicht richtig hergestellt werden.
Hat jemand eine Idee?
tapo.0
2023-11-24 22:00:18.330 info Wait for c…
-
Possibly useful resource to get access to boot loader, This camera uses the same processor but a different flash chip but the method seems universal across most SOCs
https://github.com/OpenIPC/devi…
-
Good afternoon. When installing version 3.1.4, the integration says 3.1.2 - is this an error? Devices connected to the H100 and KH100 gateways are not connected. When I try to install the working vers…
-
Received "Login error" on brand new L530 devices, The bridge shows online and the "Thing" is referencing the correct bridge. This is also a brand new instance of Openhab running on Ubuntu, installed …
-
Ich benutze die neuste Version v0.20 und die Kamera hat die 1.0.27.
Die Kamera ist schon im System drin, aber Stream und Steuerung der Kamera funktionieren nicht !!
> tapo.0 | 2024-01-11 04:46:3…
-
Hello,
Since 3.1.1 update my tapo H100 is not working and impossible to reconnect to it
"authentication issue"
No problem when a reload a 3.0.0 backup, problem is only since 3.1.1
-
I have a c425 camera running firmware `1.3.5`. I have been connecting to it with `pytapo==3.3.19` via
```python
tapo_camera = Tapo(host=CAMERA_ONE_IP, user=CAMERA_ONE_USERNAME, password=CAMERA_ONE_P…
pa-t updated
3 months ago
-
Hello @RX309Electronics. If I read it correctly, you managed to damage your firmware and the watchdog reboots it all the time.
Have you tried to flash another firmware from the microSD slot?
Her…