-
Is this normal? First time working with the code part of tapunio and a bit rusty with the Arduino but seems to be a big possible issue should you have more the a few tape files to track.
![imag…
-
Hello, I don't know if I should put this here...
it would be possible to implement in the core of commodore 64 load from TAP or T64 load images?
Thanks.
-
Hi there, I'm wondering what the minimum speed microcontroller would be. Would a 20MHz ATMEGA328 work?
-
Hi Peter.
Some ppl -- including me -- are wondering how to connect the SSD1306 display on RPi3 the right way.
I connected VCC 3,3V, GND, SD and SC. SD on PIN (not GPIO) 27 and SC on PIN (not GPI…
-
Maybe not really an issue, but more a question. You say "17/02/2018: Add a screen voltage selector, this is because some chinese oled screen came with the VCC and GND mixed. This can be change on the …
-
Recently, I brought new life into an old love and acquired a used C64. Of course, I wanted to know what could be done with such an old system using new technology and discovered your Tapuino project.
…
-
I'm mixing your code with some iec code i've developed, to have both tape and disk support.
As the code for the disk may grow (a lot), and i've added a touchscreen, i've chosen a mega 2560 as target …