-
```
Please complete the following information about your configuration:
- FreetuxTV version: 0.5.2-0maverick1
- Linux distribution and version: Ubuntu 10.10 64-bits
- VLC version: 1.1.7
- ISP: Free
D…
-
```
Please complete the following information about your configuration:
- FreetuxTV version: 0.5.2-0maverick1
- Linux distribution and version: Ubuntu 10.10 64-bits
- VLC version: 1.1.7
- ISP: Free
D…
-
RobotLab is [big](https://github.com/robots-from-jupyter/robotlab/pull/41#issuecomment-532849980) and likely to get bigger as more cool features need more (exotic) dependencies.
We could just as ea…
-
https://github.com/MindrustUK/Heatmiser-for-home-assistant/pull/75 adds support for new hvac modes. These modes are hardcoded however there are 2 minor problems with this:
1. Some hardware thermost…
-
**NAS:** DS1815+ (avaton) with 16GB RAM (2x8GB) w/two DX513's (Fully Loaded 18 drives)**.
DSM Version:** 6.2.3-25426 Update 2
**Driver version:** r8152-avoton-2.12.0-3.spk
**Switch:** Netgear MS510…
-
### Description of the problem
I am not adept in the wizardly ways of creating drivers, and would very much like to have a 2.5 or 5Gbps network connection with my NAS.
### Description of your…
-
We don't need all these tickets open for the same issue, Put all your issues here.
Thanks
-
Unfortunately, aria-hidden often gets applied to something that shouldn’t be hidden (e.g. an in one case and on some icons that should be clicked in another). Currently, screen readers can’t do anyth…
-
It's probably something stupid and easy to fix, but I've had zero success googling and troubleshooting this error myself. I'm just at a loss. I've tried to redo this several times without luck.
(…
-
Hi,
On Ubuntu dmesg log messages showed it identified as QualComm device. After that "edl printgpt" command printed it could not identify the cpu and then the device went to bad use state. Luckily …