-
Hi Wayne, I am sorry to raise an issue that isn't directly related to this repository, but I didn't know how else to ask this question.
---
A the bottom of the page [AVR/Arduino Hardware Debugge…
-
このページは気がつくと更新されます。
It's written frankly, so even if it's automatically translated into English, it might not come across correctly.
進行中
- 古い設定ファイルを食わせると互換性がなくて segmentation fault
- https:/…
-
heya, so in a branch of my standalone programmer library ive merged in enough
https://gitlab.com/bradanlane/portaprog
to allow read/write/verify of flash and fuses (eeprom not done yet)
good news: …
-
Syntax error on line 87? What the hell do you mean syntax error on line 87? What's wrong with it? How do I fix it?
I have no idea how to do this and am just cribbing from what @per1234 did for meg…
-
Hallo,
I'm dealing with TWI right now. I noticed that your naming scheme is not 100% the same. The TWI buffer length '_BUFFER_LENGTH_' should have the name TWI_BUFFER_LENGTH. Otherwise it will be t…
-
I am not so sure how difficult it is to add the support of mega0 AVR and Tiny0/1/2 AVR, similar to optiboot_x.
Stretch goal will be to add the support of AVR DA/DB/DD part, similar to optiboot_dx.
…
-
I've been troubleshooting a problem and I can't get pins PF0 or PF1 to respond to a pin change interrupt. I've tried all three interrupt menu options and even swapped out the chip in case I'd blown th…
-
Arduino 1.8.15, Win 10, megaTinyCore 2.4.2 installed via board manager. Windows board manager shows the USB port for the programmer.
Programmer Selected: SerialUPDI with serial 4.7K or diode 230400…
-
Fuse information can be stored in ELF binary and used by programmer such as _avrdude_. This makes build file somewhat more clear but is not essential.
More information: http://www.nongnu.org/avr-libc…
-
I have a perfectly set up programmer (a shiny new [SerialUPDI](https://www.tindie.com/products/mcudude/serialupdi-programmer/) since you asked) that's connected to an AVR-Ex part.
If I mistype whic…