-
I am running debian 10, and had lm4flash installed, along with libusb
When I list all USB devices, it indicates TiVa is detected in Device 012, and ready to receive new flash
debian@beaglebone:~…
-
I need to use your library with 8-bit Arduino Uno / ATmega328. I took a quick look at your code, and it looked like this is meant for a different platform. Can you please confirm if this will or will …
csurf updated
5 years ago
-
_From @blueminerals on August 23, 2016 16:49_
I work with 6 tiva boards on a usb hub and I need to flash the same program to all of them frequently. Unplugging usb cables is tedious. Energia18 seems …
-
I'm porting trampoline os to tiva c target "tm4c123gh6pm", have written required files for porting and now debugging, processor goes into hard fault after this assembly line which could be found in tp…
-
## Description
Many firmware versions I released are not fully backwards compatible. Although I try to avoid this, the communication protocol between Nextion and Tiva is kept as tight as possible, wh…
-
Hi, I tried adding this package to install Energia/Tiva-C cores for my standard Arduino. However after going to the Board Manager, no board packages show (not even offical Arduino). In the Arduino err…
-
I’m working on a port to the TI Tiva ( a close relative of the LM3S6965), and I’ve gotten stuck adding a customizable serial driver. I've been trapped in a twisty maze of Kconfig and device tree file…
-
tm4c123 unable to transmit & receive consistently to and from the CAN bus. Need to look into the interrupt handling function of tm4c.
-
Hi, I was trying to run this project and was unable to get the dependencies listed in docker_setup/omnid_docs.repos
I tried looking them up and they don't seem to be there, aside from https://githu…
-
While the function is created in https://github.com/rust-embedded-community/tm4c-hal/blob/master/tm4c123x-hal/src/time.rs
,the function is not exposed, so also Instant cannot be obtained.
```rust
…